Laser cut light colour felt

Your supply only. We don’t hold stock of any felt material. The fabrics gallery is to give an indication of how the laser reacts to different textiles. We recommend having your fabric sent straight to us from your supplier once a quotation is confirmed.

Thickness: Any thickness
Sheet sizes: Any size up to 3000×1500mm

See more on our laser cutting and engraving service for fashion and textile designers»

Material properties

There are two types of high-grade natural wool felt. Industrial / SAE felt and 100% wool felt that is usually sold for doll making / craft applications come in a multitude of colours.

Laser cutting

With all natural fabrics, the top surface of the surrounding laser cut edge mark slightly, usually with very light brown / orange singed appearance. We cut felt on the engraving table or clean honeycomb bed which can also mark the underside of the material.

Cut edge

The laser seals the edge to prevent fraying with a brown / orange appearance.
Synthetic felts are usually acrylic based. These laser cut with a glossy edge and with a more melted appearance and lighter tones.

Cut widths & Kerf

As a benchmark, we recommend that minimum cut widths be no thinner than 2mm.

Laser engraving

Most natural felts tend to engrave with a brown / orange tinge. The lighter the felt tone the stronger the engraving contrast.

Supplying fabrics as flat as possible

You need to make sure you supply your felt as flat as possible. Try and make sure it is not crumpled, this can have issues when cutting.