Ceramic
Your supply for laser engraving only. We don’t hold stock of any ceramic material you will need to supply.
Thickness: Machine holds any thickness up to 330mm
Sheet sizes: Any size up to 1246×710mm
See more on laser engraving stone»
Material properties
Ceramic is an inorganic, non-metallic solid material prepared by the action of heat and subsequent cooling.
Ceramics can’t be laser cut
It’s not possible to laser cut ceramics unfortunately. We would recommend contacting a waterjet cutting service and supplying the material cut to size for engraving.
Raster & Vector engraving
The results achieved when laser engraving ceramic differ depending on the type of ceramic you supply. In most cases the top glossy layer will be removed and the engraving will become grainy in appearance. There will be little or no change in contrast between the ceramic surface and the engraved area. We will not know how the laser reacts to your ceramic until we test it, meaning we can’t guarantee any specific outcome or result prior to testing. You will need to supply us with a portion of the material for us to establish material settings prior to running your job.
Engraving ceramic can produce dust particles that will need to be cleaned from the surface once you receive your job.
Deeper engraving.
It usually isn’t possible to engrave particularly deep into ceramic. The hardness of the material makes this difficult to achieve.